Christie Post Driver
CHPD52
Christie Engineering has been designing, developing and manufacturing petrol powered post drivers in Australia since 2010. Christie Engineering post drivers are extremely lightweight and portable, enabling an operator to move along a fence line much faster than traditional air or hydraulic driven units and yet, they are powerful enough to drive posts and pickets into the hardest ground across Australia in a matter of seconds. By manufacturing all internal components from the highest quality precision machined materials, Christie Engineering post drivers are durable and made to last, whether being used short term on a small fencing job or everyday by fencing contractors.
Some features of the CHPD52 include:
– Suitable for post types such as standard and star pickets, Y pickets, grounding rods, round posts up to 52mm OD
– High impact hammer action of 1720 Blows per Minute
– Spring dampened hand grips resulting in hours of fatigue free operation
– Protective sump guard
– Unit weight of 13.5kg
– Powered by a genuine Honda GX35 1.0kW motor (1.3hp) which includes a 3 year Australia wide warranty
– 360 degree inclinable operation
– 3 year major parts failure warranty from Christie Engineering (excludes normal wear).
Potential buyers be aware, there are other cheaper versions on the market that look very similar to our unit. Christie Engineering and our post drivers are in no way affiliated with Rhino in the USA, or Horsley Wholesale in Australia. If it’s not stamped “Christie”, it’s not one of ours. We are Engineers and innovators, manufacturers of reliable, quality equipment that we design, we do not make copies.
FEATURES
Lightweight design, powerful hammer action with ergonomic design and isolated handles. CNC machined body from Cast high strength heat treated aluminium for a long service life with stainless steel screws that will never rust. High quality sealed bearings are used in all internal rotating components. Genuine Honda GX35 4-stroke Motor with 3 years warranty, precision tool to revolutionise fencing. Australian made by Christie Engineering Pty. Ltd. Registered design: 201111227
USES
Mechanised fence post driver used for driving in Star and Y configuration posts, ground rods and guide posts. Something that every farmer or fencing contractor needs.
Ideal for temporary fencing in remote areas.
SERVICING AND PARTS
All Christie Engineering Post Drivers have a 3 year warranty on the motor (provided by Honda) and a 3 year major parts failure warranty on the Post Driver (provided by Christie Engineering).
Please contact Christie Engineering for servicing and parts.
SPECIFICATIONS
Blows Per Minute | 1720 |
Joules | 26 |
KW | 1.0 (1.3HP) at 7,000 rpm | 4-stroke, overhead camTrigger throttle with integrated stop button | Spring isolated hand grips |
Fuel Consumption | 0.71 L/h at 7,000 rpm Meets strictest worldwide emission and noise req. |
Starting System | recoil (pull start) |
Rating | Continuous use on standard posts |
Weight | 13.5kg |
Engine Warranty | 3 Year genuine Honda warranty |
Post Driver Warranty | 3 Years warranty |
Noise Level | >100dB Hearing protection required |
1720
26
1.0 (1.3HP) at 7,000 rpm | 4-stroke, overhead camTrigger throttle with integrated stop button | Spring isolated hand grips
0.71 L/h at 7,000 rpm
Meets strictest worldwide emission and noise req.
recoil (pull start)
Continuous use on standard posts
13.5kg
3 Year genuine Honda warranty
3 Year parts failure
>100dB Hearing protection required